- item sku BOL-BURST-CT-TT
- A convenient item that enables burst shooting by simply connecting it between the electric gun's battery and the connector on the main body. The connector is a mini battery specification.
- By simply attaching it between the electric gun and the battery, you can change full auto shooting to burst mode of 1 to 12 shots. By maintaining an appropriate rate of fire, you can reduce wasted shots and save battery life. The number of consecutive shots can be changed by operating the trigger while attached. When you release the burst, it becomes 30 shot mode.
[Burst set method]
① Connect the burst circuit to the gun body connector.
*Please be sure to check to make sure that BB bullets are not loaded. *Be careful of accidents
② Connect the battery to the burst circuit.
③Set the selector to the full auto position, point it in a safe direction, and keep pulling the trigger for about 5 seconds (until you hear a beeping sound).
④ When you hear a beeping sound, release the trigger, pull the trigger at a good tempo once more than the number of bullets you want to set without opening the time, and hold it (about 5 seconds). *When pulling the trigger, please do it as fast as possible. If there is a gap between pulling the trigger, the numerical value cannot be entered correctly.
If you cannot input the information correctly and an error occurs, it may not work or may move slowly several times. There is a possibility that you are not pulling the trigger at the right tempo when setting, so please remove the battery, wait about 5 seconds, and then set again from ①.
⑤When you hear a beep sound, the burst setting is complete. You can enjoy burst in full auto position.
When resetting the numerical value, please perform the setting again from ③.
- Working voltage 7.2~12.0V
- Body size 45mm x 17mm x 8mm
- Weight (grams): 50g
- Manufacturer: BOL
